PDF下载
KP-F30SCL  33 Mega pixels, 60 frames per second
By adopting a CameraLink digital interface, higher speed video data transfer is possible.Furthermore, by adopting the connector (SDR) of a Mini CameraLink standard, the size of the camera has been reduced.
High resolution combined with high frame rates are possible with this series of cameras.Can be used for high-precision and high-speed image processing in many applications.
Feature
Mini CL (Mini CameraLink)
By adopting a CameraLink digital interface, higher speed video data transfer is possible.
Furthermore, by adopting the connector (SDR) of a Mini CameraLink standard, the size of the camera has been reduced.
PoCL (Power over CameraLink)
The PoCL version is connected by a single (PoCL) Mini CameraLink cable directly to a frame grabber supporting PoCL. Simple systems construction is possible.
High Resolution & High Speed
High resolution combined with high frame rates are possible with this series of cameras.
Can be used for high-precision and high-speed image processing in many applications.

0.33 Megapixel , 60 frame/second
Frame Shutter
Higher resolution in the vertical directional is ensured for moving object.
Multi-step Shutter
A multi-step electronic shutter along with a variable speed electronic shutter is standard with a minimum shutter speed of 1/100,000 second.
Frame on Demand
A one trigger and fixed shutter mode of frame-on-demand are provided allowing precise timing and exposure for image capture.
Remote Control
Through the CameraLink interface, various setting such as shutter, mode, gain, partial scan, bit depth, etc can be adjusted.
Partial Scan
The start position and height of the image can be adjusted. Higher frame rates are possible by using partial scan mode.
Selectable bit depth
10-/8-bit
Specification
Imaging device 1/3-inch interline CCD
  Total pixels 692 (H)×504 (V)
 Effective pixels 659 (H)×494 (V)
 Pixel size 7.4 µm (H)×7.4 µm (V) (square lattice)
Sensing area 4.88 mm (H)×3.66 mm (V)
Scanning system Progressive
Aspect ratio 4 : 3
Frame rate 60 frames per second (full pixel readout)
Horizontal drive frequency 25.5454 MHz
Horizontal scanning frequency 31.468 kHz
Vertical scanning frequency 59.94 Hz
Sync system Internal
Lens mount C mount (Flange focal distance =17.526 mm)
Video output Digital output (CameraLink)
Base configuration: 24.5454 MHz
(Note: maximum cable length is 10 m)
Output image size: 659 (H)×494 (V) (full pixel readout)
Resolution Horizontal: 500 TV lines / Vertical: 490 TV lines
Sensitivity 400 lx, F4, 3200 K
Minimum illumination 1.0 lx (F1.4, MAX GAIN, without IR cut filter)
Signal noise to ratio 50 dB
Electric shutter OFF, 1/60, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 second
OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/100000 second)
Gamma γ = 1
Frame on demand Mode (A) Fixed shutter mode (8 steps or variable)
(B) ONE trigger mode
(C) Reset control mode
(D) VD reset mode
 Trigger input CameraLink (CC1) *When Reset control mode CC1 and CC2 are used
Partial scan Selectable start position and height of picture grabbing in 1H step.
Power supply voltage 12 ± 1 VDC
Current consumption Approx. 120 mA (approx. 1.5 W)
Ambient temperature Performance 0 to +40 °C (+32 to +104 °F), less than 90 % RH (without dew condensation)
 Operation 10 to +50 °C (+14 to 122 °F), less than 90 % RH (without dew condensation)
 Storage -20 to +60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation)
Vibration endurance 98 m/s² (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes
Shock endurance 686 m/s² (Drop test, once each top, bottom, left and right)
External dimensions 29 (W)×29 (W)×29 (D) mm (Not including protrusions)
Mass Approx. 50 g